At high altitudes the boundary layer of the blades of low-pressure turbine of small gas turbines for aircraft propulsion could be dominated by laminar flow and susceptible to flow separation and secondary vortices, with a reduction of turbine performance. The present study concerns the active flow control using plasma actuators to reattach the simulated separation flow over the suction surface of a low-pressure turbine blade at low Reynolds number. Different actuator geometries have been studied: a macro single dielectric barrier discharge (SDBD), a micro SDBD and a micro linear plasma synthetic jet (L-PSJ) with and without thrust vectoring. In particular, the micro plasma actuator was realized and experimentally characterized by measuring the induced wall-jet with Particle Image Velocimetry (PIV) and by evaluating the electrical power consumption. The numerical modelling was used to assess and compare the performances of the different configurations in the separation control. In presence of these active flow control devices the separated flow was successfully reduced.
A comparison between micro linear plasma synthetic jets and conventional dbd plasma actuators for separation control in a low pressure turbine
DE GIORGI, Maria Grazia;FICARELLA, Antonio;MARRA, FEDELE;PESCINI, ELISA;TRAFICANTE, STEFANIA
2015-01-01
Abstract
At high altitudes the boundary layer of the blades of low-pressure turbine of small gas turbines for aircraft propulsion could be dominated by laminar flow and susceptible to flow separation and secondary vortices, with a reduction of turbine performance. The present study concerns the active flow control using plasma actuators to reattach the simulated separation flow over the suction surface of a low-pressure turbine blade at low Reynolds number. Different actuator geometries have been studied: a macro single dielectric barrier discharge (SDBD), a micro SDBD and a micro linear plasma synthetic jet (L-PSJ) with and without thrust vectoring. In particular, the micro plasma actuator was realized and experimentally characterized by measuring the induced wall-jet with Particle Image Velocimetry (PIV) and by evaluating the electrical power consumption. The numerical modelling was used to assess and compare the performances of the different configurations in the separation control. In presence of these active flow control devices the separated flow was successfully reduced.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.