The fatigue crack growth depends on the dissipated energy at the crack tip and in this regard, different analytical and numerical models were proposed by many researchers to describe as the plastic work affect the fatigue material behaviour. Experimental tests can be carried out for evaluating the energy dissipated during the crack growth principally based on the hysteresis loop measurement. However, these techniques need of suitable equipment and set-ups and then find some restrictions if applied in-situ and on real components. In this work, an experimental approach is used to obtain a thermographic parameter capable of describing the plastic work at the crack tip. The proposed approach is based on the phase shift of the thermal signal that occurs at the crack tip in the plastic area. Two specimens of two different steels, austenitic and martensitic, were tested and monitored with an infrared camera to collect thermoelastic phase data. A similar correlation to the dissipated energy was obtained with the fatigue crack growth behavior of materials.
Evaluation of the heat dissipated around the crack tip of AISI 422 and CF3M steels by means of thermography
De Finis, Rosa;Galietti, Umberto
2019-01-01
Abstract
The fatigue crack growth depends on the dissipated energy at the crack tip and in this regard, different analytical and numerical models were proposed by many researchers to describe as the plastic work affect the fatigue material behaviour. Experimental tests can be carried out for evaluating the energy dissipated during the crack growth principally based on the hysteresis loop measurement. However, these techniques need of suitable equipment and set-ups and then find some restrictions if applied in-situ and on real components. In this work, an experimental approach is used to obtain a thermographic parameter capable of describing the plastic work at the crack tip. The proposed approach is based on the phase shift of the thermal signal that occurs at the crack tip in the plastic area. Two specimens of two different steels, austenitic and martensitic, were tested and monitored with an infrared camera to collect thermoelastic phase data. A similar correlation to the dissipated energy was obtained with the fatigue crack growth behavior of materials.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
